Hanover is a family-oriented South Shore town whose housing is dominated by colonials and capes built from the 1960s through the 2000s, spread through the neighborhoods off Route 53, Circuit Street, and Washington Street, with newer subdivisions filling in more recently. Renovation budgets here are solid and the bathroom is usually the first major project after a purchase.
The most common Hanover project depends on the era of the house. In the older colonials and capes, it is a tub-shower alcove converted to a walk-in — remove the tub, tile the space, and fit a glass panel cut to the alcove's finished width. That width is fixed by framing and is essentially never a round number, so a stock panel ordered at a nominal 60" leaves a gap at one end. We measure the finished opening in your home to 1/16" after the tile is complete and fabricate to that dimension.
In the newer houses, the primary bath typically came with a corner soaking tub beside a small separate shower stall. Removing the tub and expanding the shower into its footprint produces a much better room, and the resulting opening — defined by the old tub deck and surrounding walls — is rarely a standard size and frequently includes a return leg or an angled corner. Custom fabrication handles that directly, including corner joints and notches around a bench or niche.
Wider openings change the glass. A 3/8" panel suits alcove work; a long fixed run or a large door is noticeably better in 1/2", flatter across the span and more solid in the swing. Where a bench or a curbless entry is in the design, how the glass meets the floor and the bench edge gets resolved before fabrication.
Steam-ready configurations come up regularly in Hanover's primary-suite renovations, and they change the enclosure meaningfully — a steam enclosure needs to run to the ceiling and seal properly, which is a different build from a standard walk-in. Worth raising early if it is under consideration.
Hardware here runs toward brushed nickel and matte black, with brushed brass increasingly common. Low-iron ultra-clear glass is worth the upgrade against white marble or pale porcelain.
Glass for the Hanover area is fabricated and dispatched from our own Massachusetts facility about 11 miles away, so turnaround is quick. Our Needham showroom at 33 Highland Ave is about 31 miles from Hanover, roughly a 45-minute drive via Route 3 and Route 128.
From the first measurement to the last panel set, your Hanover project stays with Oasis employees, at a price fixed before any work begins.
